New Year Selection - No IKEA Here.

Ready for market these represent a few of my recent creations of the quirky and the rustic

Chess tables, benches and side tables

Tall stools and short ones, some with a lower shelf.

A Welsh stick back chair and a Sheffield cutlers stool

Using various types of hardwood and different styles of leg.

Lathe turned legs or robust and rustic coppiced hardwood.

Every item is individual hand made piece to reflect the character of wood available.

 And the two foreground benches have Hornbeam tops which is hardwearing and robust.

Stools and spindle chairs - How to make

 

From little to large my rustic stools

The Welsh stick back chair

Variety of small tables stools and a chair at Market Stall

Advancing on with my little stools and exploring the wide variety of styles possible with the limited tools I have in a small garage workshop, here are some thoughts for the beginner wishing to explore the practical methods of this simple craft.

The wood need not be too expensive and the type depends on availability as much as workability. Oak or Elm is preferred for the seats. Legs can be of Oak, Ash, Sycamore, Hazel, Chestnut, but these don't exclude the use of soft woods that will usually be of lighter weight.

At first I was using my battered black & decker work bench for preparing the legs under the draw knife and spoke shave. After many months struggling to speed up the process I put together a bodgers horse. This simple device is a sit-upon work horse with holding clamp – vice controlled by the foot rests. Many sorts can be found on you-tube videos.

I do use power tools as well as hand tools. The indispensable ones include the power drill, jigsaw, spokeshave, draw-knife and Japanese pull saw. The larger electric machines include a lathe and a band-saw.

The essential skill to acquire is the forming of the joint between leg and seat.

I use a Forstner bit here to drill the hole and a spokeshave to shape the circular tenon that fits this hole and a set of dividers to get a good fit.

The tenon is sawn down to form a slot for a hardwood wedge that has to be driven into the joint and lock it tightly together. A PVA waterproof wood glue is used and will ensure the joint will not fail.

My latest attempt at something more advanced is the stick back chair. Many different styles have emerged over time and I have drawn upon the wealth of images to be found on Google. Antique shop sites also picture these chairs in a wide variety of forms and an amazing variety of prices.

Finishing the wood surface, I usually apply Linseed oil. Alternatively I apply a beeswax home-brewed finish. I also have a method of scorching the wood surface with a hand held blow lamp. Before the heated wood surface cools I quickly sand down the hot surface and apply the wax which soaks deeper into the wood and may be polished with fine sandpaper or wet and dry paper. A very smooth surface with a pleasant shine and improved colour results.